|
|
Study of utility properties thermal-reflective insulations in the buildings
Holeček, Dominik ; Skříček, Darek (referee) ; Šťastník, Stanislav (advisor)
The diploma thesis is partly dedicated to energetic efficiency of buildings and describes possibilities how to evaluate energetic efficiency of buildings in the Czech Republic. We also get to know with distribution of thermal insulators by material base and use in construction. There are also mentioned methods how to determine thermal insulations characteristics of heat insulations, so called heat conductivity coefficient. The last and the crucial chapter of theoretic part is dedicated to thermal-reflective insulations. There are mentioned some of the basic characteristics of insulations, material composition and heat transfer mechanism in their structure as well. Practical part describes measurement of thermal resistance of chosen samples of thermal-reflective insulations per measuring device on the principal of Hot Box method. In the next step was determined emissivity of aluminium foils which forms the surface of chosen samples of thermal-reflective insulations. In the end of thesis are defined possibilities of use thermal-reflective insulations in building structures especially in passive and low-energy buildings in climatic conditions of the Czech Republic.
|
|
|
Study of the behavior of selected rocks at high temperatures
Holanec, Aleš ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
The diploma thesis deals with the observation and diagnostics of transformations that take place in stone slabs of different mineralogical composition during heating to high temperatures. The theoretical part of the thesis deals with a summary of available information about selected types of rocks. Furthermore, it presents findings from the experimental thermal loading of a granite sample. The principles and instruments of laboratory experimental methods that are used to judge the resistance of rocks are described in detail. In the experimental part, the testing methodology is proposed, the procedure of production of rock test specimens is described and the way in which the thermal loading of stone slabs took place is explained. The results of the experiments are shown in the tables and graphs. A comparison of individual tests and properties of selected samples and evaluation of the obtained results is performed.
|
|
|
Sports complex
Touš, Jakub ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The main focus of this thesis is to design the expansion and modernization of a sport complex "U Jezu" for a sport club TJ Roztoky. This thesis is consisted of a study for a territorial agreement. In this study, there are indicated a formation of two playing fields with the artificial surfaces, beach volleyball court proposing two building objects as a base for the entire complex, which consists of garages, storages and a main building. A more detailed design was created for the main building. As the supporting structure of the object, the transverse wall system completed with outdoor columns supporting the cantilevered portion of the ceiling tiles, which are mainly unidirectionally reinforced concrete floor slabs. The supporting structure is based on the strip foundations. The designed building object has two-above ground floors and a ground floor, which will be created by embedding the building object into the hill side. The ground floor is designed for the relaxation and the leisure purposes. Moreover, there is also a technological equipment necessary for the operation of the facility. On the first above ground floor, there are designed locker rooms for athletes, a club room with a kitchen and an accommodation unit for a manager of the complex. The second floor is for the accommodation. There are designed rooms with lounge and office of the president of the sport club. Part of the second floor consists of a terrace. For the roofing, a flat roof with a single-classic sequence of layers is designed. In this thesis, the static is partially solved. Furthermore, the object is evaluated in the terms of lighting, acoustic and thermal requirements as well as requirements for the fire safety of buildings.
|
|
|
Evaluating and modeling of fouling process in heat exchanger
Čirka, Martin ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
This diploma thesis discusses fouling processes and mechanisms of industrial heat exchangers, with focus on shell side fouling of heat transfer area by flue gases, and eventually taking fouling into account, or more precisely its modeling and predicting by calculation. Thermal-hydraulic design of heat exchanger is focused mainly on shell side, as flue gases are dominant process medium in terms of fouling and heat transfer. Based on available operational data of evaluated industrial heat exchanger, specific process has been developed to determine by calculation, or more precisely predict change of fouling factor throughout operational period of heat exchanger. Usage and various options of this specific calculation technique are being discussed in conclusion, whether there is a potential to use this technique regarding more complex operational inputs or prediction of fouling process for different operational regime of heat exchanger.
|
|
|
Anchor silicate expansion material with increased temperature resistance
Müller, Jiří ; Luňáček,, Martin (referee) ; Drochytka, Rostislav (advisor)
This master thesis deals with the development of an expansive anchor material. This material is intended especially for the engineering and power industry where the operating conditions cause thermal stresses of the anchor. In order to meet the requirements for a firm and secure connection of the anchored part, it is necessary to achieve excellent physical-mechanical properties of the developed material such as high compressive strength, high tensile strength based on the base, and resistance to thermal stresses till 200 ° C. All of these processes must be achieved after the ageing of the cement material. Due to the current trend of modern materials that are environmentally friendly, the use of partial replacements for Portland cement is used as a substitute for a primary binder.
|
|
|
Lodging house for cyclists
Jirka, Petr ; Peterka, Tomáš (referee) ; Müller, Jan (advisor)
The subject of this thesis is a design of a newly built guesthouse on a bicycle path in the village Spálené Poříčí. The building is designed in a gently sloping terrain towards the west. The main entrance faces the south. It is an object without a basement and with two above ground floors. The structure of the building is a transverse wall system made of ceramic fittings. Other walls are also made of ceramic fittings. The entire building is based upon the stripe foundations and footings. Pension is covered in the part of the accommodation and in the restaurant part with a gable roof. For the restaurant, a terrace is designed on the west side of the building. In this thesis, static and building equipments are solved. The building is also evaluated in the terms of lighting, thermal, acoustic requirements and the fire safety of building is also solved.
|
|
|
Determination of thermal properties of gloves by means of thermal manikin
Pidrová, Kateřina ; Pokorný, Jan (referee) ; Fišer, Jan (advisor)
This diploma thesis is focused on determination of thermal properties of gloves by means of thermal manikin. The background research with relation to this topic together with derivation of the computational equations used for the following measurement are presented in the first part. The most significant part of this work is suggestion of procedure for measuring the heat resistance of gloves with thermal manikin based on procedure from ČSN EN 511. This methodics was verificated with 5 pairs of gloves together with analysing the uncertainties and testing the repeatability of this measurement. This work also contains the outline for all of the measured pairs with posibilities of their usage in specific situations and surrounding air temperatures. At the end of this work is mentioned brief summary of achieved results.
|
|
|
Study efficiency of modern thermal insulations for buildings
Holeček, Dominik ; Skříček, Darek (referee) ; Šťastník, Stanislav (advisor)
The bachelor thesis is partly dedicated to energetic efficiency of buildings and describes possibilities how to evaluate energetic efficiency of buildings in the Czech republic. There is also detailed description of the heat transfer in buildings. We also get to know with production and characteristics of chosen thermal insulators. There are also mentioned methods how to determine thermal insulations characteristics of heat insulations, so called heat conductivity coefficient. The last and the crucial chapter of theoretic part is dedicated to thermo-reflective insulations. There are mentioned some of the basic characteristics of insulations and its material composition as well as usage and methods of thermo-reflective insulations installation in buildings. Practical part is dedicated to description of chosen samples of thermo-reflective insulations and determination of their heat resistance though Hot Box measuring method.
|
|
|
Development of industrial adhesive material for deposition of nonabsorbent components
Bergerová, Kamila ; Černý, Vít (referee) ; Drochytka, Rostislav (advisor)
The thesis deals with the development of industrial adhesive material for deposition of nonabsorbent components in environments exposed to aggressive chemicals and high temperatures. The theoretical part is mainly focused on summarizing knowledge about adhesive materials. The study also includes description of bonded components, describes theory of adhesion and introduces the used materials. The primary aim of this work is to present new design of material composition of a new adhesive of polymer and silicate base material. The work also investigates the possibility of using the industrial waste in the form of secondary raw material. The final part is dedicated to laboratory testing of new developed materials, summarization and discussion of the obtained results.
|
|
|
Determination of Vuppor admixture for the refractory light weighting bodies
Svobodová, Markéta ; Keršner, Štěpán (referee) ; Sokolář, Radomír (advisor)
Lightweight refractory products are materials used for the construction of certain parts of industrial furnaces, especially for iron, but also in other sectors where is operated with high temperatures. There are special requests on refractories. The theoretical part contains an overview of used raw materials, production and properties of lightweight refractory products and description of not burnable lightener - chemical additives VUPPOR I and information about previously conducted trials dealing with these topics. The practical part is divided into four parts, which are evaluated by tests which were performed on a refractory clay with chemical additive Vuppor I (samples are lightened and not lightened) - it was primarily a test of sensitivity to drying, density, compressive strength, thermal insulating properties, etc.
|
guest ::
